for further information contact your local stmicroelectronics sales office. august 2013 docid13982 rev 3 1/4 ST23YL80 secure mcu with enhanced security, crypto-processor and 80-kbyte eeprom data brief features hardware features ? enhanced 8/16-bit st23 cpu core with 16 mbytes linear addressable memory ? 396 kbytes of user rom ? 6 kbytes of user ram ? 2 kbytes of nescrypt ram ? 80 kbytes of user eeprom including 128 bytes of user otp area: ? highly reliable cmos eeprom submicron technology ? 30-year data retention ? 500,000 erase/write cycles endurance typical at 25 c ? 1 to 64 bytes erase or program in 1.5 ms ? operating temperature: ?25 to +85 c ? three 8-bit timers with watchdog and interrupt capability ? 3 v and 5 v supply voltage ranges ? external clock frequency up to 10 mhz ? high performance provided by: ? cpu clock frequency up to 29 mhz ? power-saving standby state ? contact assignment compatible with iso/iec 7816-3 standards ? asynchronous receiver transmitter (iart) for high speed serial data support (iso/iec 7816-3 and emv? compliant) ? esd protection greater than 5 kv (hbm) security features ? active shield ? enhanced nescrypt crypto-processor for public key cryptography ? hardware security enhanced des accelerator ? monitoring of environmental parameters ? protection mechanisms against faults ? ais-31 class p2 compliant true random number generator (trng) ? iso 3309 crc calculation block ? memory protection unit (mpu) ? unique serial number on each die development environment ? software development and firmware generation are supported by a comprehensive set of development tools dedicated to software design and validation: c compiler, simulator and emulator applications ST23YL80 major applications include: ? banking, it and pay tv applications micromodule wafer www.st.com
description ST23YL80 2/4 docid13982 rev 3 1 description the ST23YL80 is a serial access secure microcontroller custom-designed for secure smartcard applications. it is based on an enhanced stmicroelectronics 8/16-bit cpu core offering 16 mbytes linear addressing space. ST23YL80 devices are manufactured using an advanced highly reliable st cmos eeprom technology. moreover, an iso/iec 7816-3 emv-compliant asynchronous receiver transmitter (iart) communication peripheral is available. the following logos are trademarks of cryptography research, inc. used under license: figure 1. ST23YL80 block diagram $ l , q w h u q d o % x v , 2 v , $ 5 7 * 1 ' e l w & 3 8 & r u h [ e l w w l p h u v & 5 & 0 r g x o h & / . & o r f n * h q h u d w r u 0 r g x o h 9 f f 7 u x h 5 d q g r p 1 x p e h u * h q h u d w r u 5 $ 0 6 7 5 2 0 % r r w v r i w z d u h 6 h f x u l w \ 0 r q l w r u l q j d q g & r q w u r o 5 ( 6 ( 7 ( ( 3 5 2 0 ( ' ( 6 $ f f h o h u d w r u 8 v h u 5 2 0 6 7 5 2 0 ) l u h z d o o 1 ( 6 & 5 < 3 7 1 ( 6 & 5 < 3 7 5 $ 0 0 3 8
docid13982 rev 3 3/4 ST23YL80 revision history 3 1.1 development environment development tools for secure mcu products include a complete range of hardware systems and software tools from stmicroelectronics and third-party tool suppliers. the range of tools includes solutions to help you to develop and debug your application and evaluate secure mcu products and their peripherals. an integrated development environment (ide), the st visual develop (stvd), provides a set of tools for developing embedded applications. this interface manages the project configuration, code edition, code generation and program debugging. a smartcard ics emulator and simulator are available for developing and validating your application code. all the information needed to generate the application code and personalization will be collected in a delivery file (.dlv extension). this file is created using the delivery menu of the stmicroelectronics configuration software tool, scool. 2 revision history table 1. list of modifications date revision changes 28-feb-2008 1 first release. 10-sep-2008 2 updated maximum external clock frequency. 16-aug-2013 3 updated logo information on page 2.
ST23YL80 4/4 docid13982 rev 3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. a ll st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not authorized for use in weapons. nor are st products designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, a utomotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
